The Ultrasonic Anemometer 3D serves for the measurement of the wind direction and the wind velocity from all spatial directions. The maintenance-free and wearless anemometer needs no recalibration and is equipped with heating for winter operation even under extreme conditions.
All calculations are carried out by a high-capacity digital-signal-processor (DSP) within the propagation time of the ultrasonic signals with a 32-bit precision. The instrument offers comprehensive statistic functions such as gliding averaging, standard deviation, co-variance etc., which can be selected via the digital interface. The gliding averaging can be set optionally in vector or scalar form, identically or differently for each parameter.
Wind velocity
-
Measuring range: 0,01 to 65 m/s
-
Accuracy: ±0,1 m/s up to 5 m/s, ±2% above 5 m/s
Wind direction
-
Measuring range: 0 to 360°
-
Accuracy: ±1°
Virtual temperature
-
Measuring range: -40 to 70°C
-
Accuracy: ±0,5 K
-
Resolution: 0,1 K
Output of measured values
-
Measuring rate: 1 msec to 60 seconds, selectable in 1-msec increments
-
Output rate: 1 msec to 60 seconds, selectable in 1-msec increments
-
Digital interface: RS-485 / RS-422, bus operation, FD/HD
-
Baud rate: 1200 to 921600, selectable
-
Analogue output: 3 analogue channels for output of X,Y, Z vector-components 0-10 V load, 4000 ohms, 4-20 mA to 400 ohms load
-
Analogue inputs: 3 x standard, 2 x optional; voltage inputs 0-10 V, resolution 16 bit, measurement error < 0,1%
-
Output format: ASCII Thies, NMEA 0183 version 3, user-definable, status
General
-
Operating voltage: 12-24 VAC/DC; current consumption 3 VA, heated 150 VA; the heating, which can be switched off, is temperature-controlled
-
Temperature range: Operating temp.: -55 to 70°C storage –50 to +80°C
-
Protection: IP 65
-
Firmware update: Upload via serial interface (RS-485)
