Your shopping cart is empty.

  • EnglishNorwegian

Solinst Modell 425 Diskret Intervall Sampler

Solinst Modell 425 diskret intervall-prøvetaker settes under trykk for å ta uforurensede vannprøver fra en spesifikk dybde i en brønn.

  • Trykk fra høytrykkshåndpumpen kobles til slangehjulet
  • Finnes i 3 diametere (1, 1,66 og 2 tommer) og 2 forskjellige lengder (2 eller 4 fot)
  • Ideelt produkt for prøvetaking når den brukes med en Model 122 Interface Meter


The Solinst Model 425 Discrete Interval Sampler (DIS) is a stainless steel sampler, with LDPE tubing mounted on the convenient Solinst reel. The reel has a pressure attachment for a high pressure hand pump, and a pressure/vent switch which is used to apply and release the pressure on the sampler. A sample release device is included with each Discrete Interval Sampler.


The sampler is pressurized before being lowered into the well to prevent water flowing into the sampler. Once the desired depth is reached, the pressure is released and hydrostatic pressure fills the sampler with water directly from the sampling zone. A floating checkball inside the 1.66"ø (42 mm) and 1"ø (25 mm) samplers prevents water from entering the tubing, thus avoiding the need to decontaminate the tubing.

When the sampler is filled, it can be repressurized and raised to the surface. The sample is decanted using the sample release device, which regulates flow and minimizes degassing of the sample. The sampler is easily disassembled for decontamination.

Biodegradable disposable PVC bailers and stainless steel Point Source Bailers are also available from Solinst (see Model 428 BioBailer & Model 429 Point Source Bailer Data Sheets).

Discrete Interval No-Purge Sampling

Discrete interval sampling is ideal for obtaining truly representative water samples and for obtaining samples of product (LNAPL and DNAPL). The DIS is ideal for groundwater sampling from below an oil/product layer on the surface of the water, as it allows a sample to be obtained which is untouched by the oil.

Discrete Interval Sampling is also used to profile open bodies of water, open boreholes and screened wells, and to collect samples from distinct levels or points of inflow. Mixing of water from different levels in the well is minimized.

The Model 425 Discrete Interval sampler is also recognized as a no-purge sampler. No-purge, also known as zero-purge or passive sampling methods, have gained acceptance by many regulatory agencies worldwide for obtaining high quality groundwater samples.

These sampling methods are based on the principle that groundwater which flows into a well, maintains equilibrium with the adjacent water bearing unit. Sampling at the discrete interval should result in representative samples, without the need for purging.

  • Obtaining a representative groundwater sample from below oil/product layers
  • Discrete interval sampling in lakes, rivers and wells
  • Chemical profiling of wells
  • Sampling at points of inflow to well
  • LNAPL and DNAPL sampling

  • High quality samples
  • Sample has not been pumped through tubing
  • No mixing of water from different levels
  • Minimal disturbance of the water
  • Easy disassembly for decontamination
  • Avoids purging and disposal of purge water
  • Less cost and time to retrieve samples
  • Easy operation and transportation

  • Sampler materials: 316 stainless steel body and release device with PTFE ball valves and o-rings
  • Tubing materials: Low density polyethylene (LDPE), PTFE and PTFE-lined also available
  • Depth capability: Up to 150 m (500 ft) below water level
  • Available diameters: 1-inch, 1.66-inch and 2-inch (25,4 mm, 42 mm and 50,8 mm)
  • Available lengths: 2-ft and 4-ft (60,96 cm and 121,92 cm)
  • Bailer capacity:
    • 2-ft x 1-in: 190 mL
    • 2-ft x 1,66-in: 475 mL
    • 2-ft x 2-in: 800 mL
    • 4-ft x 1-in: 365 mL
    • 4-ft x 1,66-in: 1000 mL
    • 4-ft x 2-in: 1800 mL

  • Size (length and diameter)
  • Tubing type (LDPE standard, PTFE and PTFE-lined also available)
  • Tubing length (100, 250 or 500 feet standard)
  • Optional suspension line (Solinst Model 103 Tag Line recommended) or Interface Meter

Nylig Sett