Your shopping cart is empty.

  • EnglishNorwegian

Solinst Model 101B Grunnvanns-peiler

Solinst Modell 101B vannstandmåler er et økonomisk og grunnleggende, samtidig holdbart instrument for å måle grunnvannsnivå. Dette svært rimelige og høykvalitets-produktet fra Solinst er ideell for å måle dybden til vann i brønner, borehull, standrør og tanker.

  • Bruker en solid, rustfri stålprobe, som er koblet til holdbar polyethylen flat teip
  • Enkel, lekkasjesikker probe er 12,7 mm diameter
  • Teip markert hver cm og tilgjengelig med 30, 60 eller 100m lengde

Description

The Solinst Model 101B Water Level Meter is designed to be an economical and basic, yet durable instrument to measure groundwater levels. It is ideal for measuring depth to water in wells, boreholes, standpipes, and tanks.

Also available from Solinst, are the Standard Model 101 Water Level Meters that feature a laser marked PVDF flat tape, and the Model 102 Coaxial Cable Water Level Meters. Both options allow shut-off and sensitivity adjustment (See Model 101 and 102 Data Sheets).

The Model 101B Water Level Meter uses a solid stainless steel probe, connected to durable polyethylene flat tape. A standard 9 volt battery, housed inside the reel hub, powers the Water Level Meter. The electronics are coated for water resistance.

When the probe enters water, the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.

The Model 101B P1 Probe is made from durable stainless steel. It is designed to reduce false signals in cascading water, and is leak-proof.

The Model 101B Water Level Meter uses high quality polyethylene flat tape with accurate heat embossed markings every centimeter and meter.

The 10 mm (3/8") wide tape reels smoothly, remains flexible, hangs straight in the well and is available in 30 m, 60 m, and 100 m lengths.

Seven stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. The tape is very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.

  • Probe materials: Stainless steel
  • Probe size: 12,7 mm Ø x 102 mm length (0,5” x 4”)
  • Effective probe diameter: 16,5 mm
  • Probe weight: 100 g
  • Tape material: Polyethylene
  • Tape markings: CM3: Meters in red with markings every cm
  • Length options: 30 / 60 / 100 m

Length: 30, 60 or 100 m

Nylig Sett