Solinst Modell 101 P7 Grunnvanns-peiler
0,00 NOK
Solinst Modell 101 grunnvannspeiler er ideell for måling av vanndybde i brønner, borehull, vertikalrør og tanker. Modell 101 P7 tåler trykk opptil 500 psi og har et solid PVDF målebånd.
- Beregnet for bruk i brønner, borehull, vertikalrør og tanker
- Aktiverer lyd- og lyssignal når den kommer i kontakt med vann
- Holdbart PVDF målebånd med høy strekkfasthet
- Robuste og korrosjonsresistante komponenter
- Vendor: Solinst
Description
For measuring the depth to water in wells, boreholes, standpipes, and tanks, Model 101 Water Level Meters are the industry standard for portable hand operated meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter.
There are two versions to choose from. The Model 101 P7 Water Level Meter features a pressure-proof probe rated to 500 psi and laser marked PVDF tape. The Model 101 P2 Water Level Meter features an easy-to-repair probe and heat embossed polyethylene tape.
The P7 Probe is submersible up to 1000 ft. (300 m), ideal for measuring total well depth. The sensor at the tip of the probe provides consistent measurements with almost zero displacement. The tape seal plug design allows the probe to be quickly and easily replaced, if required.
The Model 101 P7 Water Level Meter uses extremely durable, PVDF flat tape, traceable to NIST and EU measurement standards. Each tape conductor contains 13 strands of stainless steel, and 6 strands of copper-coated steel, making the tape non-stretch and high in tensile strength and electrical efficiency.
The tape has a thick dog bone design that prevents adherence to wet surfaces, and allows it to hang straight in application. It is also easy to splice. The 3/8" (10 mm) tape comes with permanent laser markings every 1/100 ft. or each millimeter, in lengths up to 5000 ft. (1500 m).
Model 101 Water Level Meters use corrosion proof stainless steel probes attached to permanently marked flat tape, fitted on a well-balanced reel. They are powered by a standard 9 volt battery.
The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.
A sensitivity control allows the buzzer to be turned off while in cascading water, and ensures a clear signal in both high and low conductivity conditions.
- Probe materials: Stainless steel body with tape seal plug
- Probe size: 16 mm Ø x 137 mm length (0,625” x 5,38”)
- Probe weight: 128 g
- Tape material: PVDF
- Tape markings:
- LM2: Feet & tenths w/ markings every 1/100 ft
- LM3: Meters & centimeters w/ markings every mm
- Length options:
- Small reel: 30 / 60 / 100 m; 100 / 200 / 300 ft
- Medium reel: 150 / 250 / 300 m; 500 / 750 / 1000 ft
- Large reel: 400 / 500 / 600 m; 1250 / 1650 / 2000 ft
Relaterte produkter
0,00 NOK
0,00 NOK
0,00 NOK