Your shopping cart is empty.

  • EnglishNorwegian

Solinst Modell 101 P2 Grunnvanns-peiler

Solinst Modell 101 grunnvanns-peiler er ideell for måling av vanndybde i brønner, borehull, vertikalrør og tanker. Modell 101 P2 har en rustfri stålsonde og et solid målebånd.

  • Beregnet for bruk i brønner, borehull, vertikalrør og tanker
  • Aktiverer lyd- og lyssignal når den kommer i kontakt med vann
  • Høykvalitets målebånd med styrke og fleksibilitet over tid
  • Robuste og korrosjonsresistante komponenter

Description

For measuring the depth to water in wells, boreholes, standpipes, and tanks, Model 101 Water Level Meters are the industry standard for portable hand operated meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter.

There are two versions to choose from. The Model 101 P7 Water Level Meter features a pressure-proof probe rated to 500 psi and laser marked PVDF tape. The Model 101 P2 Water Level Meter features an easy-to-repair probe and heat embossed polyethylene tape.

The P2 Probe is shielded in design to reduce or eliminate false readings in cascading water. The probe consists of a stainless steel body with a neoprene heat shrink seal. It is not suitable for submergence to any significant depth. Its simple design makes it easy to repair.

The Model 101 P2 Water Level Meter uses high quality polyethylene tape that reels smoothly, remains flexible and hangs straight in the well. Heat embossed marking each millimeter or 1/100 ft. allow accurate readings. The 3/8" (10 mm) wide tapes come in lengths up to 1000 ft. (300 m).

Seven stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. They make the tape very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.

Model 101 Water Level Meters use corrosion proof stainless steel probes attached to permanently marked flat tape, fitted on a well-balanced reel. They are powered by a standard 9 volt battery.

The probes incorporate an insulating gap between electrodes. When contact is made with water, the circuit is completed, activating a loud buzzer and a light. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.

A sensitivity control allows the buzzer to be turned off while in cascading water, and ensures a clear signal in both high and low conductivity conditions.

  • Probe materials: Stainless steel body with neoprene heat shrink seal
  • Probe size: 14 mm Ø x 190 mm length (0,55” x 7,5”)
  • Probe weight: 200 g
  • Tape material: Polyethylene
  • Tape markings:
    • M2: Feet & tenths w/ markings every 1/100 ft
    • M3: Meters & centimeters w/ markings every mm
  • Length options:
    • Small reel: 30 / 60 / 100 m; 100 / 200 / 300 ft
    • Medium reel: 150 / 250 / 300 m; 500 / 750 / 1000 ft

Nylig Sett