Your shopping cart is empty.

  • EnglishNorwegian

Senceive Triaksial Tilt Sensornode

Description

The Triaxial Tilt Monitoring Sensor Node is an extremely high precision and exceptionally stable three axis wireless tilt monitoring sensor. Variable reporting rates, a robust design and up to a 15 year battery life means that Senceive tilt sensors are well suited for all environments. The wireless tilt monitor sensor nodes communicate reading through one of Senceive’s wireless communications networks (FlatMesh or GeoWAN) via a Gateway and on to our web-based platform called WebMonitor where you are able to monitor your results.

    Parameter Value
    * Approximate values only
    Dimensions excluding antenna 90 x 90 x 60 mm 90 x 96 x 60 mm (including vent)
    Total Mass 0.6 kg*
    Housing Material Die cast aluminium
    Protection (BS EN 60529: 1992 + A2: 2013) IP66 / IP67 IP68 at 1m for 24 hours
    Mounting Options Clearance holes for M4 socket head screw in bottom M4 blind holes in side Plates and brackets available for magnetic fixing, track bed, stake and pole mounting, and many other applications
    Operating Temperature Range -40°C to +85°C

    FlatMesh Radio Specifications

    Parameter Value
    * Consult with Senceive for your application
    Communication Type Proprietary FlatMesh v3 Mesh Networking Protocols IEEE 802.15.4 compliant
    Frequency Band 2400 – 2485 MHz ISM Band
    Maximum Transmit Power (EN 300 328 v1.8.1) 6.5dBm
    Maximum Permitted Antenna Gain 2.2dBi
    Range Up to 300m depending on the environment*

    GeoWAN Radio Specifications

    Parameter Value
    * Consult with Senceive for your application
    Communication Type Star Topology
    Frequency Band 863MHz – 928MHz ISM Band
    Maximum Transmit Power 20dBm (actual transmit power depends on geography)
    Range Up to 15km depending on the environment and antenna*
    Maximum Reporting Frequency 30 Seconds
    Sample Storage Stores the latest 36 days of samples at a reporting interval of 30 minutes

    Tilt Sensor Specifications

    Parameter Value
    Resolution 0.0001° (0.00175mm/m)
    Repeatability ±0.0005° (±0.0087mm/m)

    Internal battery

    Parameter Value
    * Consult with Senceive for your application
    Battery Type Lithium Thionyl Chloride
    Nominal Voltage 3.6V
    Nominal Capacity 19000mAh
    Typical Battery Life 12-15 years at 20-30 minute reporting intervals, including when acting as a relay node. *

    Certifications

    • Tested to conformity with all the essential requirements of R&TTE Directive 1999/5/EC and RoHS Directive 2011/65/EU
    • Network Rail Acceptance PA05/04146
    • London Underground Approved Product ID 2073

    Ordering Information and Accessories

    Model Description
    FM3N-IX
    LR3N-IX
    FlatMesh 3 Triaxial Tilt Measurement Sensor
    GeoWAN Triaxial Tilt Measurement Sensor
    FF-MP-S360 Swivel mounting kit with 360-degree adjustment range

    • screw directly to vertical walls
    FF-MP-V Vertical mounting plate

    • use U-bolts to fix to poles or stakes
    • use glue to fix to walls where drilling is not permitted

    Use with FF-MP-S360

    FF-MP-RA Right angle mounting bracket

    • screw to concrete tunnel linings and inclined walls

    Use with FF-MP-S360

    FF-MP-T2 Track bed mounting plate kit
    FF-MP-M2 Magnetic mounting kit High degree of adjustability, perfect for cast iron lined tunnels
    FF-BK-xxxx FF-BE Tilt beam kit See datasheet for more information
    FA-FM-WPS Waterproof straight antenna Overall node height 168mm (approx) when fitted Maximum gain +1.1dBi
    FA-FM-LPS Waterproof low profile straight antenna Minimum overall node height, perfect for track bed and tight spots Overall node height 92mm (approx) when fitted Maximum gain 0dBi
    FA-FM-ADJ Adjustable angle antenna Flexible installation, perfect for use in tunnels and indoor environments Overall node height 202mm (approx) when fitted and upright Overall node height 102mm (approx) when fitted and at 90-degree angle Maximum gain +2dBi
    FC-NC Antenna cover kit
    Use with FA-FM-LPS antenna Overall node height 96mm (approx) when fitted

Nylig Sett