piezometers

Details Specifications Documents Ordering Information Fully grouted installation permits multiple piezometers to be simply and reliably installed in a single borehole. The piezometer string and grout pipe are placed in the borehole and cement-bentonite grout is pumped until the borehole is filled. Multi-point Piezometer Strings allow for multiple Vibrating Wire Piezometers to be connected on a single cable. This facilitates...

Details Specifications Documents The SGP-3400 Series of strain gauge piezometers are designed for monitoring soil pore pressure or changes in water level. They are accurate, highly reliable and suitable for use in harsh environments often found within civil engineering applications including water wells, boreholes, dams, reservoirs, rivers, tanks or any other body of water. The sensor is housed in a...

Details Specifications Documents Simple and economic measurement of groundwater pressures in soil and rock can be carried out using Casagrande type piezometers. Geosense® piezometers are made up of low air entry porous plastic or ceramic elements which are connected to standpipe tubing and lowered into a predrilled borehole. Alternative types may be driven or pushed into soft soil. Where Casagrande...

Details Specifications Documents Ordering Information Geosense® VWP-3000 Series of Vibrating Wire Piezometers use the well-proven method of converting fluid pressures on a sensitive diaphragm into a frequency signal. Frequency signals are particularly suitable for the demanding environment of civil engineering applications, since the signals are capable of long transmission distances without degradation, tolerant of wet wiring conditions and resistant to...

Details Specifications Documents Geosense® VWPHT-3600 high temperature vibrating wire piezometers are suitable for the extreme environments of temperature and pressure found in applications such as tar, sand and deep geothermal energy extraction. They use the well-proven technology of converting fluid pressures on a sensitive diaphragm into a frequency signal which is particularly suitable for these demanding environments. Made from temperature...

Details Specifications Documents Ordering Information The Geosense® Water Level Meter (Dipmeter) is used to determine the water level within a borehole, piezometer pipe or sump. The Water Level and Temperature Meter also takes temperature measurements. The meters consist of a stainless steel shrouded probe with a specially designed conductive probe to minimise displacement errors, providing unparalleled accuracy particularly in small...

Details Documents Overview The Model 615 Drive-Point Piezometer is designed as an affordable method to monitor shallow groundwater and soil vapor in suitable conditions. The Drive-Points attach to inexpensive 3/4" (20 mm) NPT stainless steel drive pipe. The Drive-Points are designed for single use installations, and not for removal and reuse. Solinst Drive-Point Piezometers are most often installed as permanent...