Your shopping cart is empty.

  • EnglishNorwegian

Campbell Scientific CR1000X Datalogger

Campbell Scientific CR1000X er Campbells mest brukte datalogger. Den kan brukes til et bredt spekter av måle- og styrefunksjoner. Loggeren er pålitelig og robust, godt egnet for avsidesliggende installasjoner og kraftig nok til å håndtere komplekse konfigurasjoner.

  • Ideell for bruksområder som omhandler blant annet værstasjoner, vindprofilering, jordfuktighet, vannstand, vannkvalitet mm.
  • Støtter et bredt spekter av kommunikasjonsprotokoller inkludert PakBus, Modbus, SDI-12 og DNP3
  • Fleksible strøm- og kommunikasjonsmuligheter gjør den ideell for avsidesliggende steder

Description

Overview

The CR1000X is Campbell Scientific’s most widely used data logger. It can be used in a broad range of measurement and control functions. Its reliability and ruggedness make it an excellent choice for remote environmental applications, including weather stations, mesonet systems, wind profiling, air quality monitoring, hydrological systems, water quality monitoring, and hydrometeorological stations.

The CR1000X is a low-powered device that measures sensors, drives direct communication and telecommunications, analyzes data, controls external devices, and stores data and programs in onboard, nonvolatile storage. The electronics are RF-shielded by a unique sealed, stainless-steel canister. A battery-backed clock assures accurate timekeeping. The onboard, BASIC-like programming language, common to all contemporary Campbell Scientific data loggers, supports data processing and analysis routines.

Detailed Description

The CR1000X is a low-powered device designed to measure sensors, drive direct communication and telecommunications, analyze data, control external devices, and store data and programs in on-board, non-volatile storage. The electronics are RF-shielded and glitch-protected by a unique sealed, stainless-steel canister. A battery-backed clock assures accurate timekeeping. The on-board, BASIC-like programming language—common to all Campbell Scientific data loggers—supports data processing and analysis routines.

The CR1000X wiring panel includes two switchable 12 V terminals, analog grounds dispersed among 16 analog terminals, and unpluggable terminal blocks for quick deployment.


  • Operational in extreme environments with a standard operating range of -40° to +70°C and an extended operating range of -55° to +85°C
  • Connects directly to a computer's USB port
  • Captures quickly changing data values with fast analog measurement capabilities (300+ Hz)
  • Differentiates even slight changes in data values with higher resolutions measurements (24 bit Adc)
  • Includes two non-isolated current input channels for directly connecting sensors with 0-to-20 mA or 4-to-20 mA current outputs
  • Contains an onboard CPI port for hosting Campbell high-speed sensors and distributed modules (CDM)
  • Directly connects to Ethernet
  • Includes microSD card drive for extended memory requirements
  • Provides simple serial sensor integration and measurement with SDI-12, RS-232, and/or RS-485
  • Supports full PakBus networking
  • Includes embedded web page for direct connection via web browser


  • Maximum scan rate: 100 Hz
  • Analog inputs: 16 single-ended or 8 differential individually configured
  • Pulse counters: 10 (P1 to P2 and C1 to C8)
  • Voltage excitation channels: 4 (VX1 to VX4)
  • Digital I/O: 8 terminals (C1 to C8) configurable for digital input and output. Includes status high/low, pulse width modulation, external interrupt, edge timing, switch closure pulse counting, high-frequency pulse counting, UART, RS-232, RS-485, SDM, SDI-12, I2C, and SPI function. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions.
  • Communications/data storage ports: Ethernet, USB Micro B, CS I/O, RS-232, CPI, RS-485
  • Switched 12V: 2 terminals
  • Input limits: ±5 VDC
  • Analog voltage accuracy: ±(0,04% of reading + offset), 0 to 40°C
  • ADC: 24-bit
  • Power requirements: 10 to 18 VDC
  • Dimensions: 23,8 x 10,1 x 6,2 cm
  • Weight: 0,86 kg
  • Internet protocols: Ethernet, PPP, CS I/O IP, RNDIS, ICMP/Ping, Auto-IP(APIPA), IPv4, IPv6, UDP, TCP, TLS, DNS, DHCP, SLAAC, SNMPv3, NTP, Telnet, HTTP(S), FTP(S), SMTP/TLS, POP3/TLS
  • Communication protocols: CPI, PakBus, SDM, SDI-12, Modbus, TCP, DNP3, UDP, NTCIP, NMEA 0183, I2C, SPI, and others
  • Warranty: 3 years
  • Temperature range:
    • Standard: -40 to +70°C
    • Extended: -55 to +85°C
  • Data storage: 4 MB SRAM + 72 MB flash (Storage expansion of up to 16 GB with removable microSD flash memory card.)
  • Typical current drain @ 12 VDC:
    • Sleep mode: <1 mA
    • Active: 1 mA (1 Hz scan @ 12 Vdc); 55 mA (20 Hz scan @ 12 Vdc)

Nylig Sett